OBSOLETE, use the DSS or DSD instead
DSS30
DSS48
MORE THAN 90,000 UNITS SOLD
DSD48
MORE THAN 20,000 UNITS SOLD
MORE THAN 10,000 UNITS SOLD
OBSOLETE, use the DSD instead
OBSOLETE, use the SD instead
This page does not contain all our products. If you do not find what you are looking for, contact us; if we do not have it in our catalogue we can manufacture it to your own specifications.
In the following tables
click
the photograph to obtain more information about the products (not all
of
them have more on-line information).The warranty has a duration of 1
year
(direct SOLÉNER warranty). If you have any doubts concerning
these
products consult the Frequently asked questions
about our products or contact our technical
support. For commercial informationm contact our commercial
department, ask us for discounts with quantities and export prices.
Charge controllers
| AVA | |
Analogical, voltmeter and ampmeter, LEDs, 12/24V, 10/20A
Metallic galvanized
box painted in epoxy in furnace. OBSOLETE, use the DSS or DSD instead |
| DSS10 DSS30 DSS48 |
|
Digital, automatic bivoltage 12/24V or fixed 48V,
microprocessor, without
display, LEDs, 12/24V, 10/30A. Ultra slim (22 mm). Metallic galvanized
box painted in epoxy in furnace. Temperature sensor. MORE THAN 90,000 UNITS SOLD |
| DSD30 DSD48 |
|
Digital, automatic bivoltage 12/24V (30 or 50A) or fixed 48V
(40A), microprocessor, with
display 2X16, LEDs, 12/24V. Ultra slim (22 mm). Metallic
galvanized
box painted in epoxy in furnace. Temperature sensor. MORE THAN 20,000 UNITS SOLD |
| DSP | |
Digital, display LCD 2X16, 12/24V, 30A Metallic
galvanized box
painted in epoxy. Frontal de polycarbonate. Temperature sensor. MORE THAN 10,000 UNITS SOLD OBSOLETE, use the DSD instead |
| SD | |
Digital, display LCD 4X16, IP65 box, 12/24/48V, 30A. Temperature sensor, sensing inputs, RS-232. Options: pre-pay device, logging (ask factory) |
| Isotel | |
Digital, display LCD 4X16, 12/24/48V, 30A until 330A, RS-232,
remote
signaling, IP65 box. Temperature sensor. Sensing connectors. OBSOLETE, use the SD instead |
| RFAR1 |  |
Charge controller/timer for light, 12/24V, 30A input, 15A output, waterproof box. Temperature sensor. |
| RFAR2 | |
Charge controller/timer for two lights, 12/24V, 30A input, 2X15A output, waterproof box. Temperature sensor. |
| RVP |  |
Charge controller for billboard, 12/24V, 15A, waterproof box |
| CL130 CL160 |
 |
Automatic, with microprocessor, State of charge indication
with LEDs,
protected against overheating, 12V, 30/60A OBSOLETE, use the PFC12100 instead |
| CL230 CL260 |
Automatic, with microprocessor, State of charge indication
with LEDs,
protected against overheating, 24V, 30/60A OBSOLETE, use the PFC24060 instead |
|
| PFC12100 PFC24060 PFC48030 |
 |
Automatic, with microprocessor, State of
charge indication with LCD alphanumeric display and LEDs. Performs
power factor correction for better coupling with the electric
generators. 12V/100A, 24V/60A and 48V/30A continuous. |
| SM250 |  |
Modified sinewave, 12/24V, 250W OBSOLETE, use the S-250 instead |
| SM700 |  |
Modified sinewave, 12/24V, 700W OBSOLETE, use the S-600 instead |
| SM1500 SM2000 SM3000 |
 |
Modified sinewave, non reversible, 12/24V,
1500/2000/3000W
|
| SM1500R SM2000R SM3000R |
 |
Modified sinewave, reversible (charger), 12/24V,
1500/2000/3000W
OBSOLETE
|
| S300 |  |
Sine waveform, 12/24V, 300W continuous output power, AC
output via
IEC-320 connector, efficiency better than 85% PROTECTED AGAINST POLARITY INVERSION |
| S1000 S1200 |
 |
Sine waveform, display LCD 2X16, 1000 or 1200W continuous
output
power,
efficiency > 90% PROTECTED AGAINST POLARITY INVERSION |
| S1500 S2000 S2200 |
 |
Sine waveform, display LCD 2X16, 1500 to 2200W
continuous
output power, efficiency better than 90% PROTECTED AGAINST POLARITY INVERSION |
| S3300 S4000 S7000 |
 |
Sine waveform, display LCD 2X16, 3300 to 7000W continuous
output power, efficiency better than 90% PROTECTED AGAINST POLARITY INVERSION |
| CR24/1000/3 |  |
24 V DC a 230 V AC, sinusoidal 50 Hz, 3 phases, 1 kW (6 kW peak), rotary (3,000 R.P.M.), self refrigerated. Efficiency > 85% at nominal power. Excitation series/parallel. Ideal for installations where reliability will be more important than efficiency. |
| CR24/3000/3 |  |
24 V DC a 230 Vac sinusoidal 50 Hz, 3 phases, 3 kW (15 kW peak), rotary (3,000 R.P.M.). Efficiency > 90% at nominal power. Ideal for installations where reliability will be more important than efficiency. |
| BSDCA |  |
With standard three phase centrifugal pump. Standard models of 1, 2, 3 y 4 C.V. in the basic version and of 2, 3, 5, 7 y 10 C.V. in the advanced version. |
| BSDCC |  |
Positive displacement pump, DC brush less motor (without maintenance) of high efficiency (>90%), operates at any power since 10W to 1 kW with the same controller, water lift until 12o meters, flow until 6 000 liters/hour. |
| GPCC1 |  |
Pressure group, 220V, 20 liters, until 4 kg/cm2, maximum flow 10 l/minute, self aspiration 2 meters max. Includes manometer and presostate. |
| GPCC2 |  |
Pressure group, 12/24V, 20 liters, until 4 kg/cm2, maximum flow 10 l/minute, self aspiration max 2 meters. Includes manometer and presostate. |
| ADI5 | With well/tank sensor, 12/24V, 5A |
| ADI15 | With well sensor, 24V, 15A |
| Vélter B |  |
Leeward, without charge controller, without tower, 12/24V,
300W, three
blades. Weight: 30 kg Radius: 1.1 m |
| Vélter D |  |
Without charge controller, without tower,12/24V, 500W, three
blades Weight: 40 kg Radius: 1.24 m |
| Vélter I Vélter II |
 |
Without charge controller, without tour,12/24V o high
voltage, 1.000/2.000W,
three blades Weight: 100/120 kg Radius: 1.34/1.54 m |
| Vélter XV |  |
With charge controller, with tower, with trasformer, 15 kW,
three blades.
Designed for connection to the grid or stand alone systems. Weight: 500 kg Radius: 3.6 m |
| PLT1 |  |
Pelton turbine, built in aluminum and stainless steel, permanent magnets alternator. |
| PLT2 |  |
Mini Pelton turbine, built in aluminium and plastic, permanent magnets alternator. For teaching purposes. |
| RAB |  |
Electronic charge controller specific for Vélter B |
| RAD |  |
Electronic charge controller specific for Vélter D |
| RAI RAII |
 |
Charge controller specific for Vélter I y Vélter II, in waterproof box of polyester and fiber |
| Celosía |  |
Lattice type, 9 meters, with winds and accesories |
| Trípode |  |
Three poles type, 9 meters, without winds |
| Fitting |  |
Waterproof, 8W, 1.000.000 of switching cycles, 12/24V |
| Fitting |  |
18/20W, 12/24V |
| Fitting |  |
Waterproof, 18/20W, 12/24V |
| Turtle fitting |  |
Waterproof, 7W, 12/24V |
| Fluorescent ballast |  |
Electronic, 1.000.000 of switching cycles, 12/24V, 8/20/40 Watts |
| Low pressure sodium ballast (1) |  |
Electronic, 12/24V, 18/26/35/36/55 Watts |
| Low pressure sodium ballast (2) |  |
Electronic, 12/24V, two levels of power, maximum 18/26/35/36/55 Watts, minimum 50% to 70% |
Solar street lights
| F15 |
 |
15 Watt fluorescent lamp (900 lumens), 4.6 meters high,
luminaire General Electric Lunalys IP65 |
| LED30-50 |
 |
30 or 50 Watt LED lamp (2400 or 4000 lumens), 4.6 or 6.6
meters high, luminaire Soléner IP65 |
Support structures for
photovoltaic
modules
| Basic | Valid to install one PV module of 55Wp |
| Double | Valid to install one PV modules of 110Wp or two of 55Wp |
| Multiple | Frame for more than 110Wp, price for basic module of 55Wp |
| VR-8K2 |  |
Three phase, 380V, 8.2 kVA, with generated energy counter |