Street lighting
 
 
 Stand alone street lighting systems
 (1 lamp)
 
 
    The street lighting is composed by a support structure where one to three PV modules of 55 W are mounted and one or two luminaries with a fluorescent lamp or a low pressure sodium vapor lamp. Furthermore it has a electronic charge controller -  timer  that manages the desired lighting times.

    The standard models are:

        - Sodium low pressure (18, 26 y 55W)
        - Fluorescent de 36W

    Both have an optional circuit of energy saving that reduces slowly the light but a lot the energy consumption. These devices have been  entirely developed in Soluciones Energéticas and operate without any problems since 1984, being improved continuously.

    The street lighting is composed by a luminary type XRX-602 COMBI that can be used with any of the indicated lamps and provides waterproof and at the same time allows the lateral light diffusion increasing the illuminated area. The installed battery is without maintenance type, avoiding the costs associated to the electrolyte level checking. It can be mounted in a pole or planked in the bottom. The pole is conic, made from galvanized steel and six meters high. It incorporates a fixing arm for the luminary and a support structure for the PV modules.

 
 

Fluorescence 36W SOX 18W SOX 26W SOX 55W
Luminous flux 2.900lm 1.800lm 4.000lm 8.000lm
Efficiency 95lm/W 180lm/W 180lm/W 180lm/W
Lamp life time 8.000h 8.000h 8.000h 8.000h
Consumption (12V) 3A 1,5A 2,15A 4,6A
Technical characteristics

    The low pressure Sodium lamps have a yellow color and are mono chromatic (589,2 nm). The operational temperature range is from -15ºC to +60ºC of ambient temperature.

 
  Home